My Blinkie

My Blinkie

Forum Hangout

Chat

Contributors

Showing posts with label FTU Scrapkit. Show all posts
Showing posts with label FTU Scrapkit. Show all posts
Tuesday, September 3, 2024



This tutorial was written by Ashley Zimmerman on 9/2/2024
Any resemblance to any other tutorial is coincidental.
Supplies I Used:
PSP – I used 2020 but any version will do
Kit and Tube Used
FTU Golden Havoc by CCD
Template by Me
Fonts of Choice
Plugins Used: Xero Soft Mood, Penta Color Dot, Xero Fritillary

Supplies HERE

**Abbreviations I use**
DS- Drop Shadow
LP-Layer Palette
RS-Resize

DONT FORGET TO SHARPEN and ADD DROP SHADOW to EVERY ELEMENT!

Open Template Havoc
Shift+D to duplicate and close out original

Add a new raster layer and flood fill with a color from your tube
I used #ffc100

Drag element 23 onto your canvas
RS 60 %
move this above your Left and Right Shape

Activate your bottom Rectangle and move this above element 23

Activate element 23
Grab your selection tool and select the bottom half and hit delete



Sharpen and add DS V:0, H:5, Opacity:50, Blur:10

Drag Tube 1 onto your canvas below Right Long Rect
Place where half of his face is showing
Activate Right Long Rect
Grab your magic wand and select inside Right Long Rect
Selections-Modify-Expand by 2
Selections-Invert
Activate your tube layer and hit delete

Duplicate your tube layer
Image-Mirror-Horizontal
Move below Left Long Rect
Xero-Soft Mood-Default Settings
Do this on your other tube layer also
Apply Texture Effects-Blinds to both Tube layers




Drag element 59 onto your canvas below Right Shape Layer
RS 25% place it to where it fills in the entire shape
Activate Right Shape Layer
Selections-Modify-Expand by 2
Selections-Invert
Activate element 59 and hit delete

Drag element 58 onto your canvas below your Left Shape Layer
RS 30% place it to where it fills in the entire shape
Activate Left Shape Layer
Selections-Modify-Expand by 2
Selections-Invert
Activate element 58 and hit delete

On element 58 and 59
Apply Penta Color Dot 
with these settings


Then apply Blend Mode- Hard Light on Both

Add a new raster layer and flood fill with a gradient
or you can use my Gradient Background I provided in supplies

Select your Magic Wand
Activate Top Rectangle and click inside of it
Selections-Modify-Expand by 3
Selections-Invert
Activate your Gradient Layer/Background and hit delete
Do this step again in your Bottom Rectangle

Drag element 7 onto your canvas above your colored background Layer and RS 30%
Place at the left side as shown in my tag
Duplicate - Mirror - Mirror Vertical
Merge Down
Grab your selection tool and select the pieces that are showing to the right
and hit delete
Duplicate and Mirror Horizontal

Drag element 45 onto your canvas above your colored Background Layer
RS 25%
Duplicate- Mirror Horizontal

Drag element 8 onto your canvas below Element 45
RS 25% place to the left as shown in my tag
Duplicate- Mirror Horizontal
Merge together both element 45s and element 8s
Grab your selection tool and select any that is showing above
and hit delete
or use your eraser tool up to you!

Drag element 92 onto your canvas above Bottom Rectangle and RS 15%
Place in the center bottom as shown in my tag

Drag Paper 1 onto your canvas above your Colored Background Layer
Blend Mode- Multiply

Activate your Top Rectangle
Add Xero Fritillary
use whatever settings you like
(because I forgot to take a screenshot lol)
Do this again on your Bottom Rectangle


Grab your text tool and write whatever you would like if you want to
I lowered the opacity on my text

Add a new raster layer
Selections-Modify-Contract by 6
Selections-Invert and flood fill with gradient or color of choice
Apply Foto Frame




If you aren't animating then we are done!
Add your copyrights and name(s)




Animation::

In PSP

Activate your Bottom Background Layer
Edit-Copy Special-Copy Merged

BACK TO AS

Edit-Paste as new animation
CTRL+L to make 25 frames
Select All

Activate your Rebel Animation 67 (the bats)
Select All-Edit-Copy
Activate your Tag and Edit- Paste into selected frame in the center

Activate Rebel Animation 1378
resize


Select All-Edit Copy
Activate your tag and Edit-Paste into selected frame
on the bottom left and right

BACK TO PSP

Hide your bottom background layer
Activate all your other layers
Edit-Copy Special-Copy Merged

BACK TO AS

Edit-Paste Into Selected Frame
and we are done! 







This tutorial was written by Ashley Zimmerman on 9/2/2024
Any resemblance to any other tutorial is coincidental.

Supplies I Used:
PSP – I used 2020 but any version will do
Tube of Choice-
I used Anna Marine 69-1
Font of Choice
I used a mask by me - AKK_Mask05
Plugins Used: Eye Candy 4000 Gradiant Glow, Xero Bad Dream
I Used a free kit by Chaos Priestess 
Angel Fall


**Abbreviations I use**
DS- Drop Shadow
LP-Layer Palette
RS-Resize

DONT FORGET TO SHARPEN and ADD DROP SHADOW to EVERY ELEMENT!
Drop Shadow settings used: V:0, H:3, Opacity:50, Blur:10


Open a new canvas 650X650

Drag AFFrameEl01 onto your canvas
Objects-Align-Center in Canvas
RS 93%

Copy and paste your tube layer underneath your frame
I am using the JPG preview of Anna Marine 69-1

Grab your magic wand and select inside the frame
Selections-Modify-Expand by 3
Selections-Invert
Activate your tube layer and hit delete

Duplicate your tube layer
Plugins-Xero-Bad Dream-Default Settings
Blend Mode-Screen
Merge down into your original tube layer

Drag AFFlowerEl02 onto your canvas & RS 50%
Place to the bottom right
Add DS 

Drag AFKeyEl onto your canvas & RS 65%
Place below AFFlowerEl02 add DS

Drag AFFoliageEl onto your canvas & RS 50%
Place below AFKeyEl add DS

Drag AFFlowerEl01 onto your canvas & RS 85%
Place below AFFoliageEl as shown in tag add DS

Duplicate AFFlowerEl02 and move above AFFlowerEl01 to the right

Drag AFStarClusterEl onto your canvas
Flip Horizontal , RS 55% and place above your frame layer to the right

Drag AFHeartEl onto your canvas
RS 35% place above AFFlowerEl01 as shown in tag add DS

Duplicate AFFoliageEl and move below AFStarClusterEl to the right

Drag AFWordartEl onto your canvas & RS 50%
Put this above all your other layers to the left
Add Eye Candy-Gradiant Glow-White 

Drag AFPaper03 onto your canvas
and load mask I used AKK_Mask05

Crop your tag and add credits and name(s)
And we are done!


Friday, August 9, 2024

This tutorial was written by Ashley Zimmerman on 8/8/2024
Any resemblance to any other tutorial is coincidental.
Supplies I Used:
PSP – I used 2020 but any version will do
FTU Tube of Choice- BHD_FTUTube-Clown24
Template is also by me
Font of Choice - Strange and Weird
I used a mask by me - AKK_Mask035
Plugins Used: Eye Candy 4000 Glass, DSB Flux-Bright Noise, Muras Meister
I Used 1 of my Free kits 
BHD_GothicXmas

Template & Tube : HERE

**Abbreviations I use**
DS- Drop Shadow
LP-Layer Palette
RS-Resize

DONT FORGET TO SHARPEN and ADD DROP SHADOW to EVERY ELEMENT!

Open Santa_Naughty2 Template
Shift+D to duplicate and close out your original template
resize your canvas to 815x260

 activate Lil Black Rect
Selections-Select All
Selections-Float
Selections-Defloat
Open your tube BHD_FTUTube-Clown24 (or tube of choice)
(keep your tube opened in PSP!)
Edit-Copy
Edit-Paste as new layer on your template and select your *MOVE* tool
place your tube where you would like it in the rect
Selections-Invert and press delete
Blend mode Luminance Legacy Opacity 82

activate your Lil Black Rect
Selections-Select All
Selections-Float
Selections-Modify-Expand by 3
add a new raster layer name it Lil Rect Border
flood fill with color of choice
Plugins-DSB Flux-Bright Noise-Intensity 35
Sharpen and move below your Lil Black Rect layer

Activate Gradiant Rect
Selections-Select All
Selections-Float
Selections-Defloat
go back to your tube canvas
Plugins-Muras Meister Copies-Line with these settings

Edit copy
Edit-Paste as new layer on your template 
and select your *MOVE* tool
place your tube where you would like it in the rect
Selections-Invert and press delete
Plugins-Xero-Bad Dream with these settings



Activate your pxl txt and change the opacity to 30

Now the next elements are all going to be UNDER our
Black Rect Layer

Drag element 273 onto your LP & RS 30%
place all the way towards the left
Duplicate
Image-Mirror-Mirror Horizontal

Drag element 283 onto your LP & RS 25%
place below el 273 to the left
Duplicate and do the same Mirror as above

Drag element 285 onto your LP & RS 25%
place below element 283 to the bottom left
Duplicate and do the same Mirror as above

Drag element 287 onto your LP & RS 25%
place below element 283 slightly to the right
Duplicate and do the same Mirror as above
Merge your copy of el 287 down into el 287
Duplicate
Image-Mirror-Mirror Vertical

Drag element 279 onto your LP & RS 25%
place below element 287 as shown in tag
Duplicate-Image-Mirror-Mirror Horizontal
Merge your copy of el 279 into el 279
Duplicate-Image-Mirror-Mirror Vertical

Drag element 282 onto your LP & RS 25%
place below element 285 and move this to the center bottom
as shown in tag
Duplicate
Image-Mirror-Mirror Vertical
your template should be looking like this now




Drag element 107 onto your LP & RS 30%
place below element 282 and move towards the top to fill in those gaps 
that are shown in the Screenshot above
Duplicate
Image-Mirror-Mirror Vertical

Drag element 72 onto your LP & RS 25%
place below el 279 all the way to the left side towards the bottom
Duplicate
Image-Mirror-Mirror Horizontal

Drag element 55 onto your LP
Image-Free Rotate-Right-Free 20
RS 15%
place above your Naughty Glass Layer

Drag element 7 onto your LP & RS 20%
place below element 55 and move it all the way towards the left
as shown in tag

Crop your tag
add your copyrights and name(s)

and we are done!!! 

Hope you enjoyed!!
xx






This tutorial was written by Ashley Zimmerman on 8/8/2024
Any resemblance to any other tutorial is coincidental.
Supplies I Used:
PSP – I used 2020 but any version will do
FTU Tube of Choice- BHD_FTUTube-Clown24
Template is also by me
Font of Choice - Strange and Weird
I used a mask by me - AKK_Mask035
Plugins Used: Eye Candy 4000 Glass, DSB Flux-Bright Noise
I Used 2 of my Free kits 
BHD_HallowsHorrorCarnival
BHD_GothicXmas

Template & Tube : HERE

**Abbreviations I use**
DS- Drop Shadow
LP-Layer Palette
RS-Resize

DONT FORGET TO SHARPEN and ADD DROP SHADOW to EVERY ELEMENT!



I will be using two different kits for this tag
I will state which kit we are in as we go along!
This is for the Goth Challenge in Misfits which the
challenge is Opposites!
Hence Christmas and a clown!

**NOTE**
If you want your tube or papers smaller before you put them
on your template canvas into your shape layers you have to
RESIZE it BEFORE you paste as new layer onto your template canvas

Alrighty lets do this!!

Open Santa Naughty Template
Shift+D to duplicate and close out your original template
Resize your canvas to 790x250
in your LP delete the credits

Open your tube BHD_FTUTube-Clown24 (or tube of choice)
(keep your tube opened in PSP!)
C&P onto your LP & RS 61% - Sharpen your tube 
Place this below your Santa Txt Layer in the center
Duplicate your tube and go to Adjust-Blur-Gaussian Blur:3
Blend Mode-Screen-Opacity 75
Merge down into your original tube layer
add DS - V:0, H:5, Opacity:80, Blur:10

We are using BHD_HallowsHorrorCarnival for this portion

Activate your Center Rect in your LP
Selections-Select All
Selections-Float
Selections-Defloat
Open paper 5 & RS to 75%
Edit-Copy 
Edit-Paste as new layer on your template 
and select your *MOVE* tool 

place where you would like in the center rect
Selections-Invert
Hit Delete
Rename Center Paper Rect
In your LP delete your original Center Rect layer (the black one beneath it)

Activate your Center Paper Rect in your LP
Selections-Select All
Selections-Float
Selections-Modify-Expand by 5
Add new Raster Layer name it Center Border



Flood fill with color of choice
Plugins-DSB Flux-Bright Noise with these settings



Sharpen
move this below your Center Paper Rect layer

Activate your Grad Rect Right in your LP
Selections-Select All
Selections-Float
Selections-Defloat
Go back to your BHD_FTUTube-Clown24 and Edit-Copy
Edit-paste as new layer onto your template 
Select your *MOVE TOOL*
and place your tube in the rect where you would like
Selections-Invert
Hit delete
Blend mode screen
Rename Tube Right
Now
Duplicate Tube Right
Rename Tube Left
Image-Mirror-Mirror Horizontal
In your LP drag Tube Left above Grad Rect Left

Activate Skinny Rect Right
Selections-Select All
Selections-Float
Selections-Defloat
Open paper 3 & RS 55%
Edit-Copy
Edit-Paste as new layer and select your *MOVE TOOL* and 
place to the right as shown in tag
Rename Paper Right
delete your Skinny Rect Right layer

Duplicate and rename "Paper Left"
Image-Mirror-Mirror Horizontal
In your LP drag "Paper Left" above your Skinny Rect Left Layer
delete your Skinny Rect Left layer

Activate your "Paper Right" Layer 
Selections-Select All
Selections-Float
Selections-Modify-Expand by 3
Add new Raster Layer name it Paper Right Border
Flood fill with color of choice
Plugins-DSB Flux-Bright Noise BUT change the intensity to 100
Sharpen
Duplicate and rename Paper Left Border
Image-Mirror-Mirror Horizontal
Drag below your Paper Left Border

Now we are going to use BHD_GothicXmas

Drag element 289 onto your LP & RS 40%
place below Skinny Rect Top to the left
Duplicate-Mirror-Mirror Horizontal
Merge down the copy of El 289 into El 289 layer
Duplicate-Image-Mirror-Vertical
Merge down the copy of EL 289 into El 289 layer
this is what it will look like in your LP




Drag element 288 onto your LP & RS 40%
place below El 289 to the left side of canvas so it peeks out a bit
Duplicate-Image-Mirror-Mirror Horizontal

Drag element 273 onto your LP & RS 40%
place below El 288 all the way to the bottom right as shown in tag
Duplicate-Image-Mirror-Mirror Horizontal
Merge down the copy of El 273 into El 273 
Duplicate-Image-Mirror-Vertical

Drag element 282 onto your LP & RS 40%
place below element 273 and move to the top left
Duplicate-Mirror-Mirror Horizontal
Merge down the copy of 282 into El 282 and Duplicate
Image-Mirror-Mirror Vertical

Drag element 149 onto your LP & RS 40%
place below el 282 to the left
Duplicate
Image-Mirror-Mirror Horizontal

Now we are going to use BHD_HallowsHorrorCarnival kit

Drag element 62 onto your LP & RS 30%
place above Copy of El 273 to the left
Duplicate
Image-Mirror-Mirror Horizontal
Merge down the copy of 62 into El 62 and Duplicate
Image-Mirror-Mirror Vertical

Drag element 68 onto your LP & RS 40%
place below El 149
Duplicate
Image-Mirror-Mirror Horizontal

Drag element 69 onto your LP & RS 40%
place below El 68 towards the bottom right
Duplicate
Image-Mirror-Mirror Horizontal

Drag element 4 onto your LP and RS 30%
place above Skinny Rect Top to the right as shown in tag

Drag element 8 onto your LP & RS 25%
place below your tube layer to the right 

Drag element 25 onto your LP & RS 35%
place below el 8 to the left

Now we are going back to BHD_GothicXmas Kit

Drag element 51 onto your LP & RS 20%
place above element 25 towards the bottom

Drag element 198 onto your LP & RS 25%
place below your tube layer to the left

Drag element 202 onto your LP & RS 25%
place below element 198 as shown in tag

Drag element 226 onto your LP & RS 20%
place below element 202 as shown in tag

Drag element 7 onto your LP & RS 25%
place above element 198 to the left

Drag element 72 onto your LP & RS 25%
place below element 25 to the right as shown in tag

Drag element 300 onto your LP & RS 50%
place below element 226 up towards the left as shown in tag

Drag element 297 onto your LP & RS 25%
place below element 72 as shown in tag

Drag element 287 onto your LP & RS 25%
place below element 297 all the way to the left of canvas as shown in tag
Duplicate
Image-Mirror-Mirror Horizontal

Drag element 221 onto your LP & RS 20%
place above your Skinny Rect Top layer
to the left as shown in tag

Drag element 218 onto your LP & RS 45%
place below element 221 towards the left 

Drag element 102 onto your LP
Image-Free Rotate-Left 20 & RS 35%
Place below Paper Left Border to the left as shown in tag
Duplicate
Image-Mirror-Mirror Horizontal

Drag element 55 onto your LP
Image-Free Rotate-Right 20 & RS 20%
place below Copy of El 102 to the right as shown in tag

Drag element 38 onto your LP & RS 20%
place below El 7 to the left as shown in tag

Drag paper 11 onto your canvas
and add your mask layer I used 
AKK_Mask035

Crop your tag
And we are done!
Add your copyright and name(s)

Hope you enjoyed!!
xx























Search This Blog

Followers